RECKLI baluster moulds are made of an elastic synthetic material with a Shore hardness of approx. A 55 which enables easy demoulding without damage even of the most intricate balusters. The elastic moulds consist of 2 parts. The two halves have a slot and key locking system. This prevents slipping and holds the mould together tightly, thus preventing leakage and reducing to a minimum the subsequent treatment of the seams.

The two slightly conic halves of the mould can be held together with the aid of boards and clamps for casting the baluster. However, it is simpler and safer to use the appropriate one-piece sheet steel supporting form which we can also supply, at a surcharge.

Before casting each baluster the appropriate releasing or stripping agent must be applied to the mould. For concrete, RECKLI-Stripping Wax TL must be used, for gypsum, RECKLI-Gypsum Releasing Agent GTM and for polymer concrete, RECKLI-Mould Wax.

Our standard range consists of 27 different balusters. Of course, we also produce special moulds according to the customers requests as weIl as elastic moulds for hand and base rails, pillars and end stones. Due to the large diversity of forms however, these models are custom made according to specification.

The numbering under the catalogue pictures also indicate the order numbers. The measurements are approximate and indicate the height and the widest and narrowest parts of the baluster. We reserve the right to make slight changes in the designs.